The Next News

// technology and science news, explained

Tech PolicyNews3 mins read2 sources

NHTSA extends comments to December 10 on cyan marker lamps and lighting rules for driverless vehicles

The plan would ease manual lighting-control rules for vehicles with no steering wheel or pedals and allow optional cyan lamps for automated driving.

By Tech Policy Desk ·

The National Highway Traffic Safety Administration (NHTSA) has given carmakers, developers and the public until December 10, 2026, to comment on proposed changes to federal lighting rules that would accommodate vehicles driven by automated systems without a steering wheel or pedals. A notice in the Federal Register on November 16 adds 15 days to the original deadline of November 25.

Three groups asked for the extra time. The Alliance for Automotive Innovation told NHTSA on October 26, the day the proposal was published, that 30 days was not enough, because the lighting requirements are technically and legally complex and could affect both automated and conventional vehicles. Gatik AI also asked for 15 more days, and SAE International for 20. NHTSA said the requesters had shown good cause and that it will also consider late comments where it can.

What the proposal changes

The proposal amends Federal Motor Vehicle Safety Standard No. 108, which covers lamps, reflective devices and associated equipment. Two changes are not specific to automated vehicles: one would drop the standardized 12.8-volt test for integral beam headlamps, which NHTSA says the market has moved to, and another would remove the rule that, where headlamps are stacked vertically, the lower beam must come from the uppermost lamp.

The rest is aimed at vehicles equipped with an automated driving system (ADS) that have no manually operated driving controls, such as a steering wheel or brake pedal. NHTSA notes that consumers cannot yet buy such vehicles, though some manufacturers and rideshare operators already run them in a number of cities. Rules written around a human driver would be narrowed to vehicles with manual controls: the self-canceling, hand-operated turn signal control; foot- or hand-operated headlamp beam switching; the ease of switching on the hazard warning signal; and telltales for turn signals and upper beams. Vehicles without manual controls would still need a way to operate turn signals and switch beams, which could be non-manual.

Optional cyan lamps

The most visible change would be a new, optional lamp. The standard currently sets no specific rules for a lamp that tells other road users a vehicle is operating without anyone expected to watch the road. NHTSA proposes standard specifications for these ADS marker lamps, if a manufacturer fits them, but has tentatively concluded that it does not have enough information to show a safety need to make them mandatory. Fitting the lamps to vehicles without ADS functionality would be prohibited.

Proposed specifications for optional ADS marker lamps, from NHTSA's October 26, 2026, proposal
ItemProposal
ColorCyan, the blue-green defined in SAE standard J578
PatternSteady burning when activated (NHTSA asks whether flashing should be allowed for signaling)
NumberOne or two each on the front, sides and rear: four to eight in total
Mounting heightAt least 15 inches
Combining with daytime running lampsNot permitted
Required on ADS vehiclesNo; specifications apply only if fitted

The design mostly follows, with some differences, SAE International's J3134 standard for ADS marker lamps, first issued in May 2019 and revised in December 2025. The proposal cites an international survey of more than 4,400 drivers in the UK, Japan, the US and Germany, presented at a UN lighting working party in April 2025, in which upwards of 80% of respondents in the US and the UK said automated vehicles should carry a marker lamp. It also cites two years of on-road testing of the lamps by Mercedes-Benz in California, from 2023 to 2025, with five vehicles. A UN working party on automated vehicles recommends uniform rules for such a signal but does not recommend requiring the extra lighting, citing uncertainty and the need for more research.

Costs and what comes next

The Office of Management and Budget reviewed the proposal as a significant regulatory action. NHTSA expects the rule, if finalized as proposed, to count as deregulatory under Executive Order 14192, and it has not quantified benefits or costs. It anticipates no added costs for manufacturers and no safety disbenefits, and says removing an occupant's ability to interfere with the lamp controls could bring safety benefits for other road users.

Comments go to docket NHTSA-2026-1519. The changes would take effect only if NHTSA issues a final rule, and the notice gives no date for one.

Sources

  1. Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles: extension of comment period (91 FR 73504) National Highway Traffic Safety Administration (Federal Register, via GovInfo) govinfo.gov
  2. Federal Motor Vehicle Safety Standards; Modernization of FMVSS No. 108 To Accommodate ADS-Equipped Vehicles: notice of proposed rulemaking (91 FR 67243) National Highway Traffic Safety Administration (Federal Register, via GovInfo) govinfo.gov

Checked against the 2 sources above on November 16, 2026. Spotted an error? Tell us.